13.If it is necessary to replace the display hinges, remove the eight Phillips PM2.5×3.0 screws (1) that secure each display hinge to the display panel.
14.Remove the display hinges (2).
Display hinges are available using spare part number
15.If you need to remove the hinge covers from the display hinges, remove the screws that secure the hinge covers (1), and then pull the hinges toward one another (2) to remove them.
Display hinge covers are available in the Display Hinge Kit, spare part number
16.If you need to remove the WLAN antennas, remove the antenna cables from the clips (1) and routing paths built into the display enclosure.
116 Chapter 4 Removal and replacement procedures