Embedded Audit Log

The Audit log is a new log available through CLI and EWS. This is not the same Audit Log available through HAFM. The log records all configuration changes to the switch to provide data for analyzing problems caused by configuration changes.

Embedded Port Log

The Embedded Port Log is a new log that records all Fibre Channel traffic from or to the embedded port. This log is actually implemented as two logs, one that allows entry wrapping and one that stops adding entries when filled. The logs allow filtering based on Class F frames, as well as by port number, to isolate specific events or problems.

This feature is intended for advanced users to diagnose and troubleshoot traffic problems within a SAN. The Embedded Port Log is available via EWS, CLI, and HAFM.

Embedded Fabric Log

The switch-based fabric log records events related to the following services:

Fabric Controller

Path Selection

Login Server

Name Server

The Fabric log is actually implemented as two logs, one that allows entry wrapping and one that stops adding entries when filled. This log is intended to provide information for analyzing fabric and switch behaviors and problems. The Fabric log is available via EWS, CLI, and HAFM.

OSMS change

Open Systems Management Server (OSMS) is now available as a standard feature. OSMS can be enabled/disabled via EWS, Command Line Interface (CLI), and HAFM.

Default zone is disabled by default

The default zone on the Edge Switch 2/12, Edge Switch 2/24, and Edge Switch 2/32 is disabled by default. Zoning must be configured in order for any devices connected to the edge switches to communicate.

Some IP addresses must be avoided

If you use HAFM to manage other M-Series Fabric directors and edge switches, when you select IP addresses for edge switches, directors, and for the HAFM appliance, do not use IP addresses in the following range:

16