About this document

These release notes contain late breaking and supplemental information for the Edge Switch 2/12, Edge Switch 2/24, and Edge Switch 2/32.

Be sure to read these release notes before installing an edge switch. This information is periodically updated and available on the following HP web site: http://thenew.hp.com/country/us/eng/prodserv/storage.html.

•Release notes information

•Intended audience

•Firmware version 07.01.02-4

•Other edge switch documentation

•CDROM directory structure

•Supported configurations

•Cable requirements

•Important information

•Known issues

Release notes information

These release notes cover the following major topics:

•Certain unauthorized devices may increase response time for fabric operations under specific conditions with the Edge Switch 2/24

•HSG80 transparent mode not supported with IBM AIX

•HSG80 transparent mode not recommended with controller in SCSI-3 mode with

•ISL disconnect causes NOS error with the OpenVMS operating systems

•Support for speed Auto-Negotiate

•Ports may accumulate spurious events

•Possible switch reset after power failure or power off sequence

•SNMP issues

Intended audience

This document is intended for customers who purchased the Edge Switch 2/12, Edge Switch 2/24, and Edge Switch 2/32.

Firmware version 07.01.02-4

Firmware 07.01.02-4 is the latest (as of this date), firmware released with the Edge Switch 2/12, Edge Switch 2/24, and Edge Switch 2/32. The latest firmware is available on the following HP web site: http://h18006.www1.hp.com/storage/saninfrastructure.html.

Edge Switch release notes

1