HP B1274TU, B1200 i. Fan see Fan on page j. Heat sink see Heat sink on page, Remove the processor

i. Fan (see Fan on page 75)

j. Heat sink (see Heat sink on page 77)

Remove the processor:

1. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise until you hear a click.

2. Lift the processor (2) straight up and remove it.

NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned with the triangle (4) embossed on the processor slot.

Reverse this procedure to install the processor.

80 Chapter 4 Removal and replacement procedures