Managing a DriveLock password
To set, change, or delete a DriveLock password in Computer Setup, follow these steps:
1.Turn on the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.
2.Press f10 to enter Computer Setup.
3.Use a pointing device or the arrow keys to select Security > DriveLock Password, and then press follow the
4.To confirm DriveLock protection on the drive you have selected, type DriveLock in the confirmation field, and then press enter.
NOTE: The DriveLock confirmation is case sensitive.
Your changes go into effect when the computer restarts.
Entering a DriveLock password
Be sure that the hard drive is inserted into the computer (not into an optional docking device or external MultiBay).
At the DriveLock Password prompt, type your user or master password (using the same kind of keys you used to set the password), and then press enter.
After 2 incorrect attempts to enter the password, you must shut down the computer and try again.
Using Computer Setup Automatic DriveLock
In a
NOTE: You must have a BIOS administrator password before you can access the Automatic DriveLock features.
Managing an Automatic DriveLock password
To enable or disable an Automatic DriveLock password in Computer Setup, follow these steps:
1.Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.
2.Press f10 to enter Computer Setup.
3.Use a pointing device or the arrow keys to select Security > Automatic DriveLock, and then follow the
Using Computer Setup Automatic DriveLock 73