3.Insert the cable lock into the security cable slot on the computer (3), and then lock the cable lock with the key.
4.Remove the key and keep it in a safe place.
Using the fingerprint reader (select models only)
An integrated fingerprint reader is available on select computer models. In order to use the fingerprint reader, you must set up a user account with a password on the computer. This account allows you to log on to your computer with a swipe of a designated finger.
Enabling fingerprint authentication during logon
To enable fingerprint authentication during logon:
1.Select Computer > YaST.
2.Enter your root password, and then click Continue.
3.In the left pane, click Hardware, and then click Fingerprint Reader in the right pane.
4.Select the Use Fingerprint Reader option.
NOTE: To enroll your fingerprint, you must open the user management utility. You can start
this utility from the account setup dialog box by selecting the check box next to Start user management after finish.
Using the fingerprint reader (select models only) 75