AvPrn.book Page 30 Monday, February 28, 2000 11:13 AM

HP OfficeJet G Series

Begin a scan

You can initiate a scan from your PC or from your HP OfficeJet. The steps are different depending on whether your PC and HP OfficeJet are directly connected or set up through a network and depending on whether you load the original in the ADF or place it on the glass.

Use an HP OfficeJet that is connected directly to your PC

You can initiate a scan from your PC or from your HP OfficeJet.

To do this from your HP OfficeJet

1Load your original.

For more information, see “Load originals on the glass” or “Load originals in the automatic document feeder (ADF).”

2Choose one of the following:

•If you want to preview the scan, press Scan To repeatedly until Scan Single Page appears on the front-panel display, and then press START SCAN. Your HP OfficeJet scans the document, and then the scanned image appears in the HP Image Editor.

Scan Single

Scan To

Page

 

•If you want to send the scan to a specific program, press Scan To repeatedly until the applicable program appears on the front-panel display, and then press START SCAN. Your HP OfficeJet scans the document, launches the selected program, and displays the scanned image in that program.

For information on configuring the list of programs available through the Scan To list, see “Edit the front panel’s Scan To list” in the Onscreen Guide.

To do this from your PC

1Load your original.

For more information, see “Load originals on the glass” or “Load originals in the automatic document feeder (ADF).”

30

Chapter 7—Use the scan features