AvPrn.book Page 36 Monday, February 28, 2000 11:13 AM
HP OfficeJet G Series
Make copies
You can make copies using the front panel of your unit or using your PC. All copy features are available using either method. You may want to use your PC for easier access to special copy features.
All copy settings selected on the front panel are reset two minutes after the unit completes the copy job unless you save the settings as the default settings. Settings that you set in the software’s Copy dialog box are reset immediately after you process the job. (Settings changed in the software’s Copy Settings dialog box remain in effect until you change them again. For more information, see “Change settings for all future copy jobs” in the Onscreen Guide.)
Initiate the process from your HP OfficeJetFollow these steps to start a copy job from your unit.
1Load the input tray with the appropriate paper.
For more information, see “Load paper or transparency film, or load originals.”
2If you are using anything other than plain paper, press Paper Type, press X until the appropriate type appears, and then press ENTER to select it.
For more information, see “Recommended
3Load your original.
For more information, see “Load originals on the glass” or “Load originals in the automatic document feeder (ADF).”
4If you want to make more than one copy (the default), press Number of Copies, and then use the keypad to enter the number of copies.
For more information, see “Set the number of copies” in the Onscreen Guide.
5Change any other applicable settings, such as reduction, enlargement, or special features.
6Press Start Copy, Black or Color.
Initiate the process from your PCFollow these steps to start a copy job from your PC.
1Load the input tray with the appropriate paper.
For more information, see “Load paper or transparency film, or load originals.”
2Load your original.
For more information, see “Load originals on the glass” or “Load originals in the automatic document feeder (ADF).”
36 | Chapter |