3.To modify a cluster node, select the node, and then click Modify.
4.Click Apply to finish your modifications and leave the window open, or click OK to save your changes and close the Properties window.
Configuring HP 3PAR storage system
To configure HP 3PAR storage systems from the cluster software Parameters tab or the resource configuration tool:
1.To add a storage system:
a. Click Add to open the Add Array Data center Assignment window.
b.Select a storage system from the Storage System Name list.
c.Assign the storage system to a data center selected from the Data center list.
d.Click OK to save and close the window.
2.To remove a storage system, select the storage system, and then click Remove.
3.To modify a storage system, select the storage system, and then click Modify.
4.Click Apply to finish your modifications and keep the window open, or click OK to save your changes and then close the Properties window.
Setting HP 3PAR Cluster