#The APPLICATION part defines failover information for the application specified
#as value of the APPLICATION tag. For example, the command - clx3PARrun CLXSer -
#will use the below settings to check and allow access to the disk set specified
#as volume Group CLX_VG.
#Necessary object when clx3PARrun is used are:
#APPLICATION, DC_A_InServStorage_SerNum, DC_B_InServStorage_SerNum, #RCVolumeGroupA, RCVolumeGroupB, DC_A_Hosts and DC_B_Hosts
APPLICATION CLXSer | # package/service/cluster group test_application |
DC_A_InServStorage_SerNum | 1302871 # 1302871 is the data center A HP 3PAR |
array serial number |
|
#DC_B_InServStorage_SerNum | 1302835 # 1302835 is the data center B HP 3PAR |
array serial number |
|
#RCVolumeGroupA | CLX_VG # CLX_VG is the data center A HP |
3PAR Remote Copy volume group name | |
#RCVolumeGroupB | CLX_VG.r2835 # CLX_VG.r2835 is the data |
center B HP 3PAR Remote Copy volume group name |
#DC_A_Hosts clx_node1 clx_node2 # clx_node1, clx_node2 are data centre A cluster nodes
#DC_B_Hosts clx_node3 clx_node4 # clx_node3, clx_node4 are data centre B cluster nodes
#ApplicationStartup resyncwait # values: fastfailback resyncwait # Setting the fastfailback property will behave as resyncwait property when clx3PARrun is used #UseNonCurrentDataOk yes # values: yes no #Default value is yes which causes the failover operation to succeed at the destination site when the data at the destination site might not be current. On setting the value to No the resource will not come online at the destination site since the data might not be current.
NOTE: When you configure a UCF file, remove the # symbol for the properties you want to configure.
54 User configuration file and HP 3PAR Cluster Extension objects