4.Make the necessary parameter changes, and then click OK.

NOTE: HP 3PAR CLX Settings tab in the properties window of a CSV disk is visible only if that CSV disk is dependant on a "Cluster Extension 3PAR" resource.

Alternatively, users can also use HP 3PAR Resource Configuration Tool (Clx3PARResConfig.exe) to configure the CLX resource on which the CSV is dependent.

Using the resource configuration tool to set resource properties

To set CLX resource properties, users can also use the HP 3PAR Cluster Extension resource configuration tool. When using the resource configuration tool:

•You must run the tool on a Server Core or Hyper-V cluster node. You cannot run the tool on a remote management station.

•You cannot use the resource configuration tool to add or delete a resource.

•You can use the tool to configure multiple resources at one time. This saves time because you can switch resources from the tool menu.

•The resource configuration tool is recommended for Hyper-V and Server Core environments because the properties you enter are validated. When you configure HP 3PAR Cluster Extension resource properties from a remote management station or through the CLI, the properties you enter are not validated.

To use the resource configuration tool:

1.Open a command window and enter CLX3PARRESCONFIG.EXE.

2.Select the resource you want to change in the 3PAR CLX resource menu.

3.Make the necessary parameter changes, and then click OK.

Setting HP 3PAR Cluster Extension-specific resource properties 29