Downloading firmware
To download firmware:
1.Go to http://www.hp.com/go/support.
2.Click Drivers & Software.
3.Using the HP model number as your guide, enter the CNA model number, and then click Search.
4.Click Cross operating system (BIOS, Firmware, Diagnostics, etc.).
5.Select the Firmware image and download it to your server.
Downloading multipathing software
To download Windows MPIO DSM software:
1.Go to http://www.hp.com/go/support.
2.Click Drivers & Software.
3.Enter MPIO DSM, and then click Search.
4.Select the MPIO DSM software for your arrays and download it to your server. To download the Linux HP Device Mapper kit:
1.Go to http://www.hp.com/go/devicemapper.
2.Select your operating system.
3.Select the Device Mapper Multipath Enablement Kit and download it to your server.
Installing drivers and software
This section describes how to install drivers and software.
Installing the Windows device driver using the HP Smart Component kit
To install the Windows drivers:
1.Obtain the latest Smart Component for your configuration and copy it to your Windows server.
2.Unzip the driver Smart Component.
3.
The Smart Component automatically installs the FCoE driver without user intervention.
4.Click Reboot to complete the installation.
Installing the Windows utility using the HP Smart Component kit
To Install the CNA Windows OneCommand Manager utility:
1.Obtain the latest Smart Component for your configuration and copy it to your Windows server.
2.Unzip the Smart Component.
3.
The Smart Component automatically installc the OneCommand Manager software without any user intervention. When the installation is finished, click Finish to complete the installation.
NOTE: The NIC driver must be installed and the NIC ports enabled for the OneCommand Manager to operate properly.
Installing drivers and software | 11 |
