|
| Printer Specifications |
|
| |
Memory | 4 Mbytes on main board | |
| Two | |
| expansion up to a total of 76 Mbytes | |
|
| |
Paper Handling | Standard input capacity of 400 sheets through two trays of 150 | |
| sheet and 250 sheet capacity. | |
| Standard output capacity of 150 sheets | |
| Rear Manual feed – single sheet only | |
| Tray 1 (Input / Output Tray) – Sheets: up to 10, Cards: up to 4 | |
| Tray 2 (Upper Tray) – Sheets: up to 150, Cards: up to 60 | |
| Tray 3 (lower Tray) – Sheets: up to 250 | |
| All input paths handle standard media sizes (as listed below) up | |
| to 13"x19" (Super A3) |
|
| Additional, Tray 1 and the rear manual feed support media sizes | |
| as small as 4" x 6" (101.6mm x 152.4mm) | |
| ||
| of media. |
|
|
| |
Paper Size Handling | Minimum Width: 76.2 mm (4 in.) x 127.0 mm (6 in.) | |
| Maximum Width: 330.2 mm (13 in.) x 482.6 mm (19 in.) | |
|
| |
Maximum Print Width | 320 mm (12.61 in.) x 470 mm (18.49 in.) on 13 in. x 19 in. media. | |
|
| |
Recommended Media | All input paths handle the following paper weights with the rear | |
Weight | ||
| paper |
|
| Paper: | 60 to 135 g/m2 (16 to 36 lb. Bond) |
| Cards: | 110 to 200 g/m2 (110 lb. Index) |
| ||
|
| 220 g/m2 (110 lb.Index) |
HP DesignJet ColorPro Series: Getting Started Guide 17