Step 8 – Install the Printer Software
3 |
3 |
3 A3 |
3 A3 |
3.Unpack the Paper Length and Width guides.
4.Insert the Paper Length guide into the slot of the paper size you wish to load.
5.Insert the Paper Width guide into the slot of the paper size you wish to load.
6.Load paper by aligning the paper edge to the Paper Length guide first. Tap the other end of the paper to ensure that the paper is properly loaded.
7.
8. On the Control Panel, press [Menu] until PAPER HANDLING MENU appears.
9. Press [Item] to select TRAY 3 TYPE=
10.Press [Value] to select the media type you have loaded into the tray and press [Select].
Step 8 – Install the Printer Software
Before you can use the printer, you must install the printer software. To install the printer software, you need at least the amounts of memory listed in the User’s Guide installed in your computer.
For the HP DesignJet ColorPro GA printer, software supplied includes:
•Adobe PressReady driver for PostScript
•HP ColorSync color profiles (for you to install if your operating system does not contain HP ColorSync)
HP DesignJet ColorPro Series: Getting Started Guide 10
