![](/images/new-backgrounds/1241928/2419287x1.webp)
Step 1 – Unpack the Printer
Step 1 – Unpack the Printer
| d |
g |
|
f |
|
h,i | e |
| |
a | b |
| c |
745 |
685 |
337 |
532 |
1.Check that the following items are included with the printer:
a.Power Cord
b.Four HP No. 10 Ink Cartridges (black, cyan, magenta and yellow)
c.Four HP No. 10 Printheads (black, cyan, magenta and yellow)
d.Extended Tray Cover
e.Setup Poster
f.Getting Started Guide
g.Quick Reference Guide
h.Connectivity software (drivers, etc. on CD or diskettes)
i.HP JetDirect CD (HP DesignJet ColorPro GA printer only).
2.Prepare printer location.
The location requirements for the printer are:
• A sturdy, level surface for placement
• A space allowance around the printer
• A well ventilated room
• No exposure to direct sunlight or chemicals, including ammonia based cleaning solutions
• An adequate power supply
• A stable environment – no abrupt temperature or humidity changes
• Relative humidity 20% to 80%
• Room temperature 59° to 95° F (15° to 35° C).
HP DesignJet ColorPro Series: Getting Started Guide 4