Information

Table 2-2Configuration Page

Callout

Area on the screen

Information or capability that the area provides

 

 

 

1

HP EWS tabs and menus

For more information, see Navigating through the HP Embedded Web

 

 

Server.

 

 

 

2

Printer Information

Lists the serial number, version numbers, and other information for the

 

 

device.

 

 

 

3

Installed Personalities and

Lists:

 

Options

Version and TCP/IP address for all network devices connected to

 

 

 

 

the product (Jetdirect or internal Jetdirect)

 

 

All of the printer languages that are installed (such as printer

 

 

command language [PCL] and PostScript® [PS])

 

 

Options that are installed in each DIMM slot and EIO slot

 

 

USB devices that can be connected to a printer used as a host USB

 

 

controller, such as mass storage devices, card swipes, or keypads

 

 

 

4

Color Density

Lists the cyan, magenta, yellow, and black (CMYK) values for highlights,

 

 

midtones, and shadows.

 

 

 

5

Calibration Information

Lists the last color-plane registration (CPR) page count, the last CPR

 

 

page-count date, the last page count (in engine cycles) for DMAX/

 

 

DHALF, and the last DMAX/DHALF page-count date.

 

 

Color plane registration occurs when new print cartridges are installed

 

 

to compensate for any slight variations that might occur in cartridge

 

 

circumference.

 

 

DMAX is a density calibration of each print cartridge color at 100%

 

 

coverage; DHALF is also a density calibration of each print cartridge

 

 

color, but as a halftone instead of a full color. During halftone printing,

 

 

the dots of toner are spread out, and coverage of the toner is less than

 

 

100%.

 

 

 

6

Memory

Lists the memory information, PCL Driver Work Space (DWS), and

 

 

resource saving information.

 

 

 

7

Event Log

Lists the number of active entries in the Event Log and the Event Log

 

 

total capacity.

 

 

 

8

Security

Lists the status of the control-panel lock, disk write-protect options, and

 

 

direct-connect (USB or parallel) ports.

 

 

You can change the status of the Direct Connect ports on the General

 

 

Security screen under the Settings tab by selecting or clearing the

 

 

Disable Direct Ports check box.

 

 

 

9

Paper Trays and Options

Lists the size and type of media that is specified for each of the trays in

 

 

the product. If a duplexing unit or any paper-handling accessories are

 

 

installed on the product, information about those devices is also listed

 

 

here.

 

 

 

10 Chapter 2 Viewing product status from the HP EWS Information screens

ENWW

Page 18
Image 18
HP CP3505 manual 2Configuration, Server