HP CP3505 manual Mail Server, Configuring outgoing e-mail, 3E-mail Server

E-mail Server

Use the E-mail Server screen to configure e-mail settings for outgoing e-mail. Use the settings on this screen to send and receive e-mail messages, including product alerts. The following illustration, table, and procedures describe how to use this screen.

Figure 3-3E-mail Server screen

Settings

Table 3-3E-mail Server

Callout	Area on the screen	Information or capability that the area provides
1	HP EWS tabs and menus	For more information, see Navigating through the HP Embedded
		Web Server.
2	Outgoing e-mail	Configure outgoing e-mail if you intend to use the Alerts or
		AutoSend features. For more information, see Using the Alerts
		screen with a product .

3	Return E-mail Address	This is the device's e-mail address that appears in device alerts.
		For more information, see Configuring the return e-mail address.
4	Enable SMTP Authentication	If your SMTP server requires authentication, type the credentials
		here.

Configuring outgoing e-mail

You must configure outgoing e-mail if you intend to use the Alerts or AutoSend features.

1.Find the TCP/IP address or fully-qualified domain name of the simple mail transfer protocol (SMTP) mail server on your network. The EWS uses the SMTP server TCP/IP address to relay e-mail messages to other computers.

NOTE Your organization's network or e-mail administrator typically provides this information

2.Select the Enable Outgoing E-mail check box.

28 Chapter 3 Configuring the product from the Settings screens ENWW