HP CQ40-105TU, CQ40-300 manual Optical drive, For use in computer models with Intel processors

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.

Description	Spare part number
For use in computer models with Intel processors:
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe	482178-003
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive	482175-003
DVD±RW and CD-RW Combo Drive	487295-001
For use in computer models with AMD processors:
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe	482178-004
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive	482175-004
DVD±RW and CD-RW Combo Drive	487295-004

Before removing the optical drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 41).

Remove the optical drive:

1.Position the computer with the right side toward you.

2.Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.

3.Insert a thin tool, such as a paper clip (2), into the release access. (The optical drive media tray is partially ejected from the optical drive.)

42 Chapter 4 Removal and replacement procedures