Manuals / HP / Computer Equipment / Laptop

HP D1E80UA, 2000 manual Copyright 2011 Hewlett-Packard Development Company, L.P, its proprietor

Models: 2000

1 115

Download 115 pages 52.59 Kb

Page 2

© Copyright 2011 Hewlett-Packard Development Company, L.P.

AMD and the AMD Arrow logo and combinations thereof, are trademarks of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel, Celeron, and Pentium are trademarks of Intel Corporation in the U.S. and other countries. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of

its proprietor.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Fourth Edition: December 2011

First Edition: March 2011

Document Part Number: 638661-004

Image 2

HP D1E80UA, 2000 manual Copyright 2011 Hewlett-Packard Development Company, L.P, its proprietor

Contents

Maintenance and Service Guide HP 2000 Notebook PCFourth Edition December First Edition March Document Part Number Copyright 2011 Hewlett-Packard Development Company, L.Pits proprietor Safety warning notice iv Safety warning notice 1 Product description Table of contents4 Removal and replacement procedures External component identificationPackaging and transporting guidelines 9 Recycling 7 Backup and recovery8 Power cord set requirements IndexPage 1 Product description equipped with an AMDequipped with an 2 Chapter 1 Product descriptionComputer models Category 4 Chapter 1 Product description Category 6 Chapter 1 Product description 2 External component identification DisplayButton Chapter 2 External component identificationesc key KeysKeys fn keyLights 10 Chapter 2 External component identificationTouchPad TouchPad12 Chapter 2 External component identification Left siderefer to the Regulatory, Safety, and Environmental NoticesRight side Right sideBottom 14 Chapter 2 External component identificationService tag 3 Illustrated parts catalog16 Chapter 3 Illustrated parts catalog Spare part number Computer major componentsComputer major components 18 Chapter 3 Illustrated parts catalog For use only with computer models equipped with an AMD E450 1.65-GHz processor Component Battery20 Chapter 3 Illustrated parts catalog Spare part numberComputer major components Display assembly subcomponents 22 Chapter 3 Illustrated parts catalogCable Kit Cable KitMass storage devices 24 Chapter 3 Illustrated parts catalogMiscellaneous parts Miscellaneous partsPlastics Kit 26 Chapter 3 Illustrated parts catalogSequential part number listing Sequential part number listingDescription 28 Chapter 3 Illustrated parts catalogSpare part number Sequential part number listing Description 30 Chapter 3 Illustrated parts catalogSpare part number Description Sequential part number listingSpare part number Description 32 Chapter 3 Illustrated parts catalogSpare part number Service considerations 4 Removal and replacement proceduresPreliminary replacement requirements Cables and connectorsElectrostatic discharge damage Grounding guidelinesDrive handling Typical electrostatic voltage levels EventPackaging and transporting guidelines Workstation guidelinesVoltage protection level Equipment guidelinesMaterial Component replacement procedures Service tagBattery Computer feetOptical drive select models only 4. Remove the battery see Battery on page Remove the optical drive Component replacement procedures9. Remove the optical drive bracket Reverse this procedure to reassemble and install the optical drive42 Chapter 4 Removal and replacement procedures WLAN module Reverse this procedure to install the WLAN module 44 Chapter 4 Removal and replacement proceduresMemory module Hard drive 7. Remove the hard drive 4. Disconnect the hard drive connector cable 1 from the system boardComponent replacement procedures Reverse this procedure to reassemble and install the hard drive 48 Chapter 4 Removal and replacement proceduresKeyboard 2. Rest and secure the computer on its left side 50 Chapter 4 Removal and replacement proceduresRemove the keyboard 3. Partially open the computerTop cover Page 7. Open the computer Component replacement procedures6. Turn the computer right-side up, with the front toward you TouchPad cable 3 included in the Cable Kit, spare part number54 Chapter 4 Removal and replacement procedures Keyboard see Keyboard on page Top cover see Top cover on page Power button boardOptical drive see Optical drive select models only on page Keyboard see Keyboard on page Top cover see Top cover on page TouchPad button boardOptical drive see Optical drive select models only on page 4. Remove the TouchPad button board 4 and cables from the top cover Reverse this procedure to install the TouchPad button board and cableComponent replacement procedures Keyboard see Keyboard on page Top cover see Top cover on page USB boardOptical drive see Optical drive select models only on page Optical drive see Optical drive select models only on page Power connector cableUSB board see USB board on page Keyboard see Keyboard on page Top cover see Top cover on pageKeyboard see Keyboard on page Top cover see Top cover on page SpeakersOptical drive see Optical drive select models only on page USB board see USB board on pageKeyboard see Keyboard on page Top cover see Top cover on page Optical drive connector cableOptical drive see Optical drive select models only on page Display assembly DescriptionSpare part numberTop cover see Top cover on page USB board see USB board on page Power connector cable see Power connector cable on pageWLAN module see WLAN module on page Keyboard see Keyboard on page Remove the display assembly64 Chapter 4 Removal and replacement procedures b. Disconnect the module cable 2 from the moduleComponent replacement procedures 7. If it is necessary to replace the hinge covers66 Chapter 4 Removal and replacement procedures 8. If it is necessary to replace the display panelComponent replacement procedures 9. If it is necessary to replace the display hinges68 Chapter 4 Removal and replacement procedures 10. If it is necessary to replace the display panel cableSystem board Fan and heat sink see Fan/heat sink assembly on page Display assembly see Display assembly on pageRTC battery see RTC battery on page Memory module see Memory module on pageReverse this procedure to install the system board Component replacement proceduresPower connector cable see Power connector cable on page RTC batterySystem board see System board on page Display assembly see Display assembly on pageFan/heat sink assembly Optical drive see Optical drive select models only on page Power connector cable see Power connector cable on pageDisplay assembly see Display assembly on page WLAN module see WLAN module on page Keyboard see Keyboard on page1. Disconnect the fan cable from the system board Remove the fan/heat sink assemblyComponent replacement procedures 2. Turn the system board upside down, with the front toward you76 Chapter 4 Removal and replacement procedures Component replacement procedures 78 Chapter 4 Removal and replacement procedures Component replacement procedures Optical drive see Optical drive select models only on page ProcessorHard drive see Hard drive on page 2. Lift the processor 2 straight up, and then remove it Top cover see Top cover on page System board see System board on pageWLAN module see WLAN module on page Keyboard see Keyboard on page Starting Setup Utility 5 Setup Utility BIOS and System DiagnosticsUsing Setup Utility Changing the language of Setup UtilityNavigating and selecting in Setup Utility Displaying system informationUpdating the BIOS Restoring factory settings in Setup UtilityExiting Setup Utility 1. Windows 7-Select Start Help and Support Maintain Determining the BIOS versionDownloading a BIOS update Using System Diagnostics 6 Specifications Computer specifications15.6-inch display specifications 88 Chapter 6 SpecificationsHard drive specifications Hard drive specifications7 Backup and recovery RestorePage Performing a system restore Restoring using the dedicated recovery partition select models onlyRestoring using the restore media Changing the computer boot orderBacking up and recovering your information When to create restore points Using Windows Backup and RestoreUsing Windows system restore points Create a system restore point Restore to a previous date and time8 Power cord set requirements Requirements for all countriesRequirements for specific countries and regions 98 Chapter 8 Power cord set requirementsDisplay Battery9 Recycling 100 Chapter 9 Recycling Perform the following steps3. Remove the display bezel Display 6. Remove the display panel assembly 2 from the display enclosure7. Turn the display panel assembly upside down 13. Remove the backlight cover 10. Remove the display panel frame 2 from the display panel12. Lift the top edge of the backlight cover 2 and swing it outward 14. Turn the display panel right-side up18. Remove the backlight from the backlight frame 16. Turn the display panel upside down17. Remove the backlight frame from the display panel Display23. Remove the LCD panel 24. Recycle the LCD panel and backlight 19. Disconnect the display cable 1 from the LCD panel21. Release the LCD panel 3 from the display rear panel 104 Chapter 9 RecyclingIndex J jacks