HP D500 manual Connecting the Legacy Module

Using the Legacy Module

Connecting the Legacy Module

1.Remove the access panel. Refer to “Removing and Replacing the Access Panel” on page 3-1.

2.Remove the rear panel cover. Refer to “Removing the Rear Panel Cover” on page 4-2.

3.Align the plastic tabs on the Legacy Module with the holes in the rear panel, then press firmly to seat the Legacy Module into the Legacy Module connector.

4.Replace the grounding screw.

Installing the Legacy Module and Grounding Screw

5. Replace the access panel.

Hardware Reference Guide 4–3