HP L1510 15” LCD Monitor

Setting Up Your Monitor

Connecting the Cables

This monitor is equipped with an auto-sensing power supply for voltage ranges 100 ~ 240V AC, 50 ~ 60 Hz. Only use with the supplied adapter.

audio connectors

video connector

adapter output

video cable

power source

 

power cord

 

1Make sure the system power is turned off.

2Plug the signal cable into the signal connector at the rear of the PC.

3Plug the adapter output cable into the jack at the rear of the monitor and the power cord to the adapter.

4Plug the video cable into the video connector at the rear of the monitor.

Secure the cable by tightening the thumb screws on the video connector.

5Connect the audio cables to the connectors according to the following color definitions:

Red + Green end ➔ PC

Red + Blue end ➔ rear of LCD monitor

6Connect the power cord to the power source.

7Turn on the computer and the monitor.

6English