HP dc5750 manual Removing the Computer Access Panel

Removing the Computer Access Panel

1.Remove/disengage any security devices that prohibit opening the computer.

2.Remove all removable media, such as diskettes or compact discs, from the computer.

3.Turn off the computer properly through the operating system, then turn off any external devices.

4.Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer.

5.Push down on the button (1) to release the latch that secures the access panel to the computer chassis.

6.Slide the access panel back (2) about 1.3 cm (1/2 inch), then lift it off the unit.

Figure 2-2Removing the Computer Access Panel

10 Chapter 2 Hardware Upgrades ENWW