If you are installing printer software, close all software programs except the HP DeskJet installer.

When all software programs are closed, only Program Manager appears.

Additional information about installing your printer software

Closing software programs

In Windows 3.1x:

1While holding down ALT, press TAB to locate an open software program.

2When you locate an open software program, release both keys.

3Click File, and then click Exit.

4Repeat steps 1 through 3 for each open software program.

In Windows 95, Windows 98, and Windows NT 4.0:

1Right-click the software program on the taskbar and click Close.

2Repeat step 1 for each open software program.

Setting your printer as the default

To set your printer as the default in Windows NT 4.0:

1Click Start on the taskbar, click Settings, and then click Printers.

2Right-click the HP DeskJet 710C Series Printer icon and choose Set As Default.

Communications test and two-way communications

The printer software tests the communication between your computer and your printer and tells you if you have two-way communication. Two-way communication allows your printer and computer to communicate and gives you access to all the features of your HP DeskJet printer. The cable between your printer and computer must be bidirectional to allow two-way communication– the HP IEEE-1284-compliant Parallel Interface Cable (C2950A) is best. If you do not have two-way communication, your printer cannot send messages to the computer. However, you can still print.

14