If the “New Hardware Found” dialog box appears at any time during the installation, click in the upper- right corner of the box. or click Cancel.

Depending upon the operating system on your computer, your boxes might differ from the Windows 95 boxes shown throughout this document and the user’s guide.

Windows NT 4.0 users: You need to set the HP DeskJet Printer as the default printer. See

page 14 for instructions.

Installing from the CD:

Windows 95, Windows 98, and Windows NT 4.0

6Insert the CD into your CD-ROM drive.

After a few seconds, the HP DeskJet opening screen appears.

7If the opening screen does not appear, do the following: a. Click Start on the taskbar, and then click Run.

b.Type d:\setup and click OK.

If your CD-ROM drive is assigned to a letter other than “d”, type that letter instead or browse to locate the CD-ROM drive.

8When the opening screen appears, click Install the HP DeskJet 710C Series Software on your PC and follow the instructions on the screen.

If something goes wrong, see page 13.

9When the installer instructs you to restart Windows, the installation is almost complete. Remove the CD from your CD-ROM drive and restart Windows.

9