HP DL380 Generation 7 (G7) manual Configuration Information Factory Integrated Models, HP Models

QuickSpecs

HP ProLiant DL380 Generation 7 (G7)

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.

NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.

NOTE: FIO indicates that this option is only available as a factory installable option.

Step 1: Base Configuration (choose one of the following configurable models)

HP Models	HP ProLiant DL380 G7 SFF Configure-to-order Server	583914-B21
	Factory Integrated Model ships with:
	Two HP NC382i Dual Port Multifunction Gigabit Server Adapters
	Smart Array P410i Controller
	I/O slots - 3 Slots come standard:
	Slot 1 - FL/FH x8 PCIE (x16 connector)
	Slot 2 - HL/FH x4 PCIE (x8 connector)
	Slot 3 - HL/FH x4 PCIE (x8 connector)
	Additional Slots may be added via selections from the PCI Information and
	Options subsection
	System Fans - 4 (2 additional fans included with second processor)
	Drive Cage - 8-SFF (Second SFF drive cage optional)
	USB - 2 Rear, 2 Front, 1 Internal, 1 SD slot
	Server Management - (iLO 3) (embedded)
	NOTE: Power Supply not included - choose from Options section
	HP ProLiant DL380 G7 LFF Configure-to-order Server	583917-B21
	Factory Integrated Model ships with:

Two HP NC382i Dual Port Multifunction Gigabit Server Adapters

Smart Array P410i Controller

I/O slots - 3 Slots come standard:

Slot 1 - FL/FH x8 PCIE (x16 connector)

Slot 2 - HL/FH x4 PCIE (x8 connector)

Slot 3 - HL/FH x4 PCIE (x8 connector)

Additional Slots may be added via selections from the PCI Information and

Options subsection

Drive Cage - 6-LFF

System Fans - 4 (2 additional fans included with second processor)

USB - 2 Rear, 2 Front, 1 Internal, 1 SD slot

Server Management - (iLO 3) (embedded)

NOTE: Power Supply not included - choose from Options section

NOTE: On LFF Model Optional Optical Drive is not available

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

HP Processors	NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21 unless
	Performance Model features are desired. Then choose one xxxxxx-L21 and the
	DA - 13595 Worldwide — Version 65 — March 25, 2013	Page 20