Setup Utilities and Diagnostics Features
Computer Setup (Continued)
Heading | Option | Description |
Standard | SATA Port 0 | |
CMOS | SATA Port 1 | |
Features | SATA Port 2 | |
(continued) | ||
SATA Port 3 | ||
|
For each, allows you to:
•IDE Channel 0 Master (for SATA Port 0 Only)
•IDE Channel 1 Slave (for SATA Port 1 Only)
•detect HDD size and head on selected channel
•set extended drive on selected channel to (for SATA Port 2 and port 3 only):
•None
•Auto
•set access mode on selected channel to:
•CHS
•LBA
•Large
•Auto
•view:
•Capacity
•Cylinder
•Head
•Precomp
•Landing Zone
•Sector
| Legacy Mode Support | Disable | |
| (for SATA 0/1 ONLY) | Enable | |
|
|
| |
| Halt On | Allows you to set at: | |
|
| • All Errors | |
|
| • No Errors | |
|
| • All but Keyboard | |
|
| • All but Diskette | |
|
| • All but Disk/Key | |
|
|
| |
Advanced | F11 Prompt | Allow you to enable or disable this feature. | |
BIOS Features |
|
| |
Quick Power On Self Test | Disables/enables the system to skip certain | ||
| |||
|
| tests while booting. | |
|
| Enabling this feature decreases the time | |
|
| required to boot the system. | |
|
|
| |
| POST Delay Time (seconds) | Allows you to set a POST delay time to: | |
|
| • 0 Sec | |
|
| • 5 Sec | |
|
| • 10 Sec | |
|
| • 15 Sec | |
|
| • 20 Sec |
✎Support for specific Computer Setup options may vary depending on the hardware configuration.
Service Reference Guide |