Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis
6.2.2Front Bezel (MT Chassis)
1.Prepare the computer for disassembly (Section 6.1, “Preparation for Disassembly”).
2.Remove the access panel (Section 6.2.1, “Access Panel (MT Chassis)”).
3.Press outward on the three latches on the right side of the bezel 1, then rotate the right side of the bezel off the chassis 2 followed by the left side.
*
*These apply for selected models and countries only.
4.Continue to rotate the bezel, then push the bezel to the bottom to release the top latches from chassis.
To reinstall the front bezel, reverse the removal procedure.
5.Insert the three hooks on the left side of the bezel into the slots on the chassis and rotate the bezel on from left to right 1 so that it snaps in place.
*
* These apply for selected models and countries only.
Service Reference Guide |