Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis

4.To remove the front bezel, gently pull up all three tabs 1 on the top of the bezel, then pull the bezel 2 away from the chassis.

✎

✎

Removing the Front Bezel

To reassemble the computer, reverse the above procedure.

Press down while replacing the access panel. Refer to the label on the inside of the access panel for more information.

To re-install the front bezel, insert the two bezel bottom tabs, then rotate the front bezel forward to snap the three tabs on the top of the bezel in place.

Service Reference Guide

483941-001

6–5