Adjusting the projector
Input menu
For a visual aid, see “Back panel” on page 12.
Input menu
Component | Shows the source connected to the |
| port (YPbPr). |
|
|
Shows the source connected to the | |
|
|
Composite | Shows the source connected to the |
| port. |
|
|
DVI | Shows the source connected to the DVI port (available |
| only on certain models). |
|
|
Picture menu
Some picture adjustments are available only when certain input ports are in use. Unavailable adjustments are shown in gray in the
Picture menu
Color settings... | Adjusts the picture and colors. |
|
|
Brightness | Brightens or darkens the picture. |
|
|
Contrast | Sets the difference between light and dark areas. |
|
|
Sharpness | Sharpens or softens the picture. |
|
|
Color saturation | Adjusts the intensity of colors. |
|
|
Tint | Shifts colors toward red or green. |
|
|
Color space | For certain component inputs, selects the type of color |
| standard used by the source. |
|
|
Reset color settings | Restores these color settings to their default settings. |
|
|
Shape settings... | Adjusts the shape of the picture. |
|
|
Keystone | Corrects the slanted sides of the picture. This |
| compensates for a projector that is too high or low |
| relative to the screen. |
|
|
Reset keystone | Resets the keystone correction to zero (no correction). |
|
|
Widescreen input | Sets whether a widescreen (16:9) input device is in use. |
| Adjusts the height of the picture accordingly. |
|
|
User’s Guide | 39 |
