HP FC 1GB/2GB 16B manual LEDs On the SFP Media Side

3

Operating the HP Surestore FC 1Gb/2Gb Switch 16B

•16 port speed LEDs on the SFP media side (above and to the right of each port) to indicate the current link speed of each port.

•One switch power LED below the serial port on the SFP media side, to indicate whether the switch is on and has successfully booted.

•Two power supply LEDs on the power supply side (one on each power supply) to indicate the status of each power supply.

•One switch status LED in the center of the power supply side to indicate whether the switch is on and has successfully booted, and whether any of the ports are faulty.

LEDs On the SFP Media Side

Figure 3-1shows the SFP media side of the FC 16B with the LEDs identified.

Switch Power LED	Ethernet Port
Serial Port	Optical Port (16x)
Port Status LED (16x)	Port Speed LED (16x)

Figure 3-1The SFP media side of the FC 16B

Table 3-1describes the LEDs on the SFP media side of the switch.

3-2 HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference