A Product Specifications

•Two fan trays, each containing two fans. Air is pulled in through the rear intake and pushed out through the vents in the SFP media side. The fans provide adequate cooling for the maximum switch power rating of 102 Watts.

•Three digital thermometers, capable of sensing a temperature range from -55 °C to +125°C, in 0.5°C increments.

•A motherboard that is completely enclosed in an EMI (electromagnetic interference) enclosure tray. The logic and chassis ground are connected to the chassis by screws. The embedded processor can process frames up to 1024 bytes.

•A real-time clock (RTC) with a 10-year, non-customer replaceable, battery and 56 bytes of

NVRAM.

Weight and Physical Dimensions

The dimensions of the FC 16B are listed in the following table.

Table A-1

Physical Specifications

 

 

 

Dimension

 

Value

 

 

 

Height

 

1U

 

 

 

Depth

 

24 inches (61.0 cm)

 

 

 

Width

 

17 inches (43.2 cm)

 

 

Weight (with both power

28.5 lbs (12.9 kg)

supplies installed)

 

 

 

 

Facility Requirements

To ensure correct operation of the switch, the facility where the switch is in use must meet the following requirements:

•Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating on the switch nameplate.

•An air flow of at least 300 cubic feet per minute, available in the immediate vicinity of the switch.

•The power specifications listed in Table A-2 on page A-3.

•The environmental specifications listed in Table A-3 on page A-3.

•The electrical interference must be less than the levels stated in the standards listed in Table A-4,under “Immunity” (on page A-5).

•If the switch will be installed in an EIA rack:

•All equipment installed in the rack should have a reliable branch circuit ground connection, and should not rely on a connection to a branch circuit, such as a power strip.

•The rack should be balanced and the installed equipment within the rack’s weight limits. Ensure the rack is mechanically secured to insure stability in the event of an earthquake.

A-2

HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference