HP FC 1GB/2GB 16B LEDs On the Power Supply Side

3 Operating the HP Surestore FC 1Gb/2Gb Switch 16B

Table 3-1	SFP Media Side LED Patterns During Normal Operation
Location	Purpose	Color of LED	Status of Hardware	Recommended
of LED	of LED			Action
		Steady green	The port is transmitting/	No action required.
			receiving at 2 Gbps.
Below	Indicates	No light	Either the switch is off, or	Verify that the switch
Serial	switch		boot is not complete, or	is on and boot has had
Port	power		boot has failed.	time to complete. If
				there is still no light,
				contact your HP
				account representative.
		Steady green	Switch is on and boot has	No action required.
			successfully completed.
		Slow-flashing	Diagnostic failure on one or	Errors may be listed in
		green	more ports.	the error log. Refer to
				the Fabric OS
				Procedures Guide for
				more information.

LEDs On the Power Supply Side

Figure 3-2shows the power supply side of the switch with the LEDs identified.

Power Supply LED (2x) Switch Status LED Power Supply #1

AC Power Switch (2x)	Fan Tray Assembly (containing
Power Supply #2	fans #1 and 2)
	Spring Latch (2x)

Fan Tray Assembly (containing fans #3 and 4)

Figure 3-2The power supply side of the FC 16B

3-4 HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference