HP FC 1GB/2GB 16B Power Supply Specifications, Environmental Requirements

Product Specifications A

Power Supply Specifications

The power supplies are universal and capable of functioning worldwide without using voltage jumpers or switches. They meet IEC 61000-4-5 surge voltage requirements and are autoranging in terms of accommodating input voltages and line frequencies. Each power supply has its own builtin fan for cooling, pushing the air towards the front of the switch.

.
Table A-2	Power Supply Specifications
Specification		Value
Outlet		Correctly wired and earth-grounded
Total power available		126 Watts, with fans operating
from each power supply
Max. switch power		90 - 102 Watts (depending on SFP media vendor)
Input voltage		100 - 240 VAC
Input line frequency		47 - 63 Hz
Harmonic distortion		Active power factor correction per IEC1000-3-2
BTU rating		108 Watts x 3.412 BTU/Hr/Watts = 368.5 BTU/hr
Inrush current		10 Amps Peak, > 300 usec - hot/cold start
Input line protection		Fused in both hot & neutral lines
Maximum dimensions		3.5” wide, 1.5” high, 13.5” long

Environmental Requirements

The following table lists the environmental ranges that are acceptable when the FC 16B is operating, and the ranges that are acceptable when the switch is not operating.

Table A-3	Environmental Requirements
Condition		Acceptable Range
Temperature (operating)		10°C to 40 °C
Temperature (non-operating)		-35°C to 65 °C
Humidity (operating)		5% to 85% RH non condensing, at 40°C
Humidity (non-operating)		0% to 90% RH non-conducting, at 40°C
Altitude (operating)		0 to 3 kilometers above sea level
Altitude (non-operating)		0 to 12 kilometers above sea level

HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference Guide A-3