Speaker assembly
Description | Spare part number |
|
|
Speaker assembly |
|
|
|
Before removing the speaker assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 45).
5.Remove the following components:
a.Optical drive (see Optical drive on page 49)
b.Keyboard (see Keyboard on page 56)
c.Top cover (see Top cover on page 58)
Remove the speaker assembly:
1.Turn the top cover upside down.
2.Remove the two Phillips PM2.5×4.0 screws (1) that secure the speaker assembly to the computer.
3.Lift the speaker assembly (2) straight up to remove it from the top cover.
Reverse this procedure to install the speaker assembly.
Component replacement procedures 61
