The display cable is available in the display cable kit, spare part number
15.If it is necessary to replace the display bracket and hinges, remove the Phillips PM2.0×3.0 screws
(1)that secure each bracket to the display.
16.Remove the display hinges (2) from the display. The display bracket and hinge set is available using spare part number
17.If it is necessary to replace the wireless antennas and cables, remove the adhesive strip (1) that secures each antenna to the display back cover.
18.Detach the wireless antenna (2) from the display back cover .
19.Remove the antenna cables from the clips (3) built into the display enclosure.
Component replacement procedures 77
