Service door
Description | Spare part number |
|
|
Plastics Kit (contains the service door) | |
|
|
Before removing the service door, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 32).
Remove the service door:
1.Using a small Phillips screwdriver, loosen the service door capture screw (1).
2.Slide the service door (2) forward slightly and lift the front right corner (3) to tilt the service door.
3.Remove the service door (4) at an angle.
Reverse this procedure to replace the service door.
Component replacement procedures 33
