HP g6-2111us manual Hard drive

6.Press the release tab (2) and remove the bezel from the tab side (3).

7.Remove the bezel (4) from the ODD.

Reverse this procedure to reassemble and install the optical drive.

Hard drive

NOTE: If your replacement hard drive was shipped without an operating system installed, you will need to install it using the system recovery discs. (see Installing a hard drive without an operating system on page 38).

If your replacement hard drive shipped with an operating system (image) installed, system recovery discs are not required for setup. (see Installing a hard drive with an operating system on page 38)

NOTE: The hard drive spare part kit does not include the hard drive cable, hard drive bumpers, or hard drive bracket and screws.

Description	Spare part number
Supports the following 9.50 mm, 6.35 cm (2.50 in) SATA hard drives:
1 TB, 5400 rpm	676521-001
750 GB, 7200 rpm	633252-001
750 GB, 5400 rpm	634250-001
640 GB, 5400 rpm	669300-001
500 GB, 7200 rpm	634925-001
500 GB, 5400 rpm	669299-001
320 GB, 7200 rpm	641672-001
320 GB, 5400 rpm	622643-001
Supports the following 7.00 mm, 6.35 cm (2.50 in) SATA hard drives:
320 GB, 7200 rpm	634862-001

36 Chapter 4 Removal and replacement procedures