Installation Overview & Planning
Installing HP Fabric Clustering System
Screw locations are the same in the switch regardless of rail orientation.
Figure 1-7 Rail-to-Switch Attachment Locations
Attach rail to switch in the (6) locations highlighted in white.
Bezel end
Figure 1-8 Attach Rail to Switch
Step | 3. | Repeat steps Steps 1 and 2 on the other side of the switch. | |
|
| The two sliding rails should still be unattached. | |
Step | 4. | Loosely attach the switch with one screw through the front of each rail. | |
|
|
|
|
|
| CAUTION | Temporarily support the switch until the sliding rails are attached. |
|
|
|
|
Figure 1-9 Loosely Attach Rail to Rack
CAUTION Do not let the switch hang unsupported from only the fixed rail flanges.
10 | Chapter 1 |
