Licenses from previous versions of the software and licenses included in the
Correcting the number of licensed cores or sockets
Insight Dynamics - VSE for Integrity products are licensed per core or socket on managed HP Integrity and HP 9000 systems. When licenses from a previous release or from the
You are responsible for verifying that the correct number of licenses are applied to your managed systems, based on the number of cores or sockets in use. In order to remain in compliance with your End User Licensing Agreement, you may need to correct the count assigned during the license migration process. To correct the count assigned during migration, enter the following command on the CMS:
vselicense
where count is the correct number of
Migrating previously unused licenses
If permitted by your licensing agreement with HP, unused licenses that were purchased for an earlier release but have not yet been installed or scanned can be migrated to the License Manager database and applied to a managed system by the vselicense command, using the following procedures. These procedures should also be used to enable the LTUs included with the
To scan for
1.Install the
2.Establish common WBEM credentials for communication between the CMS and the managed systems, or configure SSH for use in HP SIM. In previous versions of the software, SSH was required in order to scan for
It is also possible to scan for the gWLM LTU (T2762AA) by communicating directly with the gWLM agent if it is running on the managed system. However, this will provide no information about the other LTUs. To perform this type of scan, use the
NOTE: The gWLM scanning option is only supported for gWLM agent versions earlier than version 4.0.
3.Execute one of the following commands on the CMS (note that multiple
•Scan for T2786AC, T2784AC, T2782AC, and T2762AA LTUs using WBEM or SSH: vselicense
•Scan for T2762AA LTU by communicating with the running gWLM agent: vselicense
42 Command reference