5.For each check performed by this task, one of the following status indicators is displayed:

PASS

No configuration problem was found

 

 

FAIL

A serious configuration problem was found. You must resolve the problem for correct

 

operation of Insight Dynamics.

 

 

WARN

A configuration problem was found. The problem will not necessarily prevent correct

 

operation of Insight Dynamics, but it may limit or restrict operation of some features.

 

 

N/A

Not Applicable: the check does not apply to this type of system.

 

 

6.Optional: To print a copy of the output, click View Printable Report, then click Print.

This task writes detailed information to the log file (/var/adm/syslog/vseassist.log on HP-UX systems, installation-directory\logs\vseassist.logon Microsoft Windows systems). Check the log file for details of any problems encountered.

TIP: The vseassist command line that was executed by this task is displayed on this screen above the output box. This command is also displayed in the printable version of the report. You can use this information to create your own diagnostic scripts that can be run from the command line.

You can review these results again later by selecting Tasks & Logs→View Task Results... from the HP SIM menu bar.

Check managed node configuration

This task checks the configuration of HP-UX, Microsoft Windows or Linux managed systems by using mxexec to copy the vseassist command to selected managed systems, and remotely execute it there. When troubleshooting your Insight Dynamics configuration, perform the “Check CMS configuration” (page 25) task first, to make sure that you do not have any unresolved CMS configuration issues. Then use the “Check CMS to managed node communication” (page 26) task to resolve communication issues with managed systems where you are having problems. Once you have resolved the communication issues, use this task to resolve configuration issues for any managed systems where you are still having problems.

Procedure 4-3 Check the configuration of managed systems

1.Optional: Select the managed systems where you are having problems. You can select systems by checking the selection box next to each system name in the Visualization View in Virtualization Manager. If you prefer, you can start this task with no systems selected. In that case, you are prompted to select the systems from the available HP SIM system collections after the next step below.

2.Select Diagnose→Troubleshoot Insight Dynamics→Check Managed Node Configuration... from the HP SIM menu bar.

3.Optional: If no systems have been selected yet, you are prompted to select from the available HP SIM system collections. If you already selected systems, then those systems are displayed

in the Verify targets screen. HP SIM provides several options for adding or removing systems on this screen. For help, select Help→For HP Systems Insight Manager from the HP SIM menu bar, then select the Managing with tasks topic..

4.To schedule this task to run periodically or at a set time, click Schedule. The Schedule Task

screen is displayed. Help on scheduling options is available from that screen. After the task executes, you can view the results by selecting Tasks & Logs→View Task Results... from the HP SIM menu bar.

To run this task immediately, click Run Now. This executes the vseassist command on the CMS and displays the results in the Stdout tab.

Diagnose menu actions 27