30 HP KVM Server Console Switch User Guide

5.Repeat steps 1 through 3 for any other servers to be added to this system.

6.Connect the local port KVM cable to the cascaded HP KVM Server Console Switch.

7.Power on the cascaded HP KVM Server Console Switch.

8.Power on the monitor.

9.Power up the server.

10.Update the cascaded HP KVM Server Console Switch firmware ("Updating the Firmware" on page 75).

11.Update all Interface Adapter firmware ("Updating the Firmware" on page 75).

12.Power off the cascaded HP KVM Server Console Switch.

13.Disconnect the local KVM cables from the cascaded HP KVM Server Console Switch.

14.Connect the local port KVM cable to the main HP KVM Server Console Switch.

15.Connect a UTP CAT5 cable to the server connection port ("Components" on page 17) on the main HP KVM Server Console Switch.

16.Connect the other end of that same UTP CAT5 cable to the RJ-45 interface port ("Components" on page 17) on the cascaded HP KVM Server Console Switch.

17.Repeat steps 15 and 16 for any other console switches to be added to this system.

18.Power on the console switches.

19.Power on the monitor.

20.Update the main HP KVM Server Console Switch firmware ("Updating the Firmware" on page 75).

21.Update all Interface Adapter firmware ("Updating the Firmware" on page 75).

The following figure shows an HP KVM Server Console Switch cascaded to another HP KVM Server Console Switch. The top console switch is the main console switch, while the bottom console switch is the cascaded console switch.