HP KVM Clear, Commands, Scan Enable, Activating Scan Mode, Deactivating Scan Mode, Removing Servers from the Scan List, 62 HP KVM Server Console Switch User Guide

62 HP KVM Server Console Switch User Guide

IMPORTANT: Selecting the checkbox beside each server to be added to the scan list creates the scan list. The creation of a scan list does not start the Scan mode. You must enable Scan mode through the Scan Enable checkbox on the Commands dialog box.

NOTE: If the user removes a server from the Device Modify dialog box later, the change can affect a custom scan pattern.

Removing Servers from the Scan List

1.From the Scan dialog box ("Activating Scan Mode" on page 62), click the server to be removed.

-or-

Double-click a server name or port. -or-

Click Clear to remove all servers from the scan list.

2.Click OK to save settings.

Activating Scan Mode

1.From the Commands dialog box ("Accessing the Commands Dialog Box" on page 68), select Scan Enable.

2.Click X to close the Commands dialog box.

NOTE: The scanning begins as soon as you click Scan.

Deactivating Scan Mode

If the OSD is open, select a server.

-or-

If the OSD is not open, move the mouse or press any key on the keyboard. Scanning stops at the currently selected server.

-or-