HP KVM Changing the Switch Mode, Esc, Pause, Switch, Print Scrn, Setup>Switch, Accessing the Switch Dialog Box, 2.Select either Preemptive or Cooperative

Local Port Operation 67

To immediately activate the screen saver, press the Print Scrn key, and then press the Pause key. This command only works when the user is connected to a server.

Changing the Switch Mode

You can connect to attached servers using two methods:

•Preemptive—Allows any user to select any server at any time; a request from another user disconnects the current user without warning

•Cooperative—Maintains the current user connection; the current user will not be disconnected if another user requests connection

Accessing the Switch Dialog Box

1.From the Main dialog box ("Accessing the Main Dialog Box" on page 41), click Setup>Switch. The Switch dialog box is displayed.

2.Select either Preemptive or Cooperative.

3.Click OK to save settings. -or-

Click X to exit, or press the Esc key to exit without saving settings.