HP KVM Setting Local Console Switch Security, Scan Enable, Security dialog box

Local Port Operation 63

From the Commands dialog box ("Accessing the Commands Dialog Box" on page 68), deselect Scan Enable. Any active connections on the local port are disconnected.

Setting Local Console Switch Security

The OSD enables you to set security on the local port consoles. You can establish a Screen Saver mode ("Activating Screen Saver Mode without Password Protection" on page 66) that engages after the HP KVM Server Console Switch remains unused for a user-definable time delay. When engaged, the HP KVM Server Console Switch remains locked until any key is pressed or the mouse is moved. Then you can enter the password to log in.

Use the Security dialog box ("Accessing the Security Dialog Box" on page 64) to lock your HP KVM Server Console Switch with password protection, set or change the password, and enable the screen saver.

NOTE: If a password has been previously set, you must enter the password before you can access the Security dialog box.