HP L919g manual Connecting the Monitor

Setting Up the Monitor

Connecting the Monitor

1.Place the monitor in a convenient, well-ventilated location near your computer.

2.Connect the signal cable 1. When attached, tighten the thumbscrews to secure the connection.

a.For analog operation, connect one end of the VGA signal cable to the VGA connector on the monitor and the other end to the VGA connector on the computer. This cable is provided with the monitor.

b.For digital operation, use the DVI-D signal cable. Connect one end of the DVI-D cable to the DVI connector on the monitor and the other end to the DVI connector on the computer. This cable is provided with the monitor.

ÄCAUTION: The DVI-D cable supplied with the monitor is for digital-to-digital connection only. Your computer must have a DVI-compatible graphics card installed for use with this cable.

3–4 User Guide