HP L919g manual Installing the HP Display LiteSaver Software

Operating the Monitor

■Check Signal Cable— Indicates the signal cable is not properly connected to the computer.

■OSD Locked—The OSD can be enabled or disabled by pressing and holding the Menu button on the front panel for 5 seconds. If the OSD is locked, the warning message OSD LOCKED displays for ten seconds.

❏If the OSD is locked, press and hold the Menu button for 5 seconds to unlock the OSD.

❏If the OSD is unlocked, press and hold the Menu button for 5 seconds to lock the OSD.

■Unrecognized monitor Plug&Play (VESA DDC) monitor found—The video card installed in the computer may not support plug and play function.

HP Display LiteSaver

HP Display LiteSaver is a software application, available on the CD, that increases monitor life and saves energy. It allows you to place your monitor into its low power sleep mode at predefined times by shutting down or reducing power to most internal circuits. This helps protect the LCD panel against image retention. Image retention can occur when the monitor is left on while displaying the same image for an extended period of time, leaving a shadow of the image on the screen.

Installing the HP Display LiteSaver Software

1.Insert the CD in the computer CD-ROM Drive. The CD menu displays.

2.Select “Install HP Display LiteSaver Software.”

3.After installing the software, click the HP Display LiteSaver icon in the Windows system tray or right-click the icon and select Configure... from the pop-up menu.

User Guide 4–13