3.Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.

NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it.

4.Close the disc tray and place the disc in a protective case.

Slot load

1.Press the release button (1) next to the drive.

2.Remove the disc (2) by holding it by the edges and avoid touching the flat surfaces.

3.Place the disc in a protective case.

42 Chapter 6 Drives

Page 52
Image 52
HP : LY849UA, : LW883AW, : G4 1107NR, : B4B15UA manual Slot load