HP M1530 Does not specify a size, Legal Def. Paper Type Lists available, Cancel, Tray is empty

Menu Item	Sub-menu item	Sub-menu item	Description
Paper Setup	Def. Paper Size	Letter	Sets the size for printing internal reports or any print job that
		A4	does not specify a size.
		Legal
	Def. Paper Type	Lists available	Sets the type for printing internal reports or any print job that
		media types.	does not specify a type.
	Tray 1	Paper Type	Sets the default size and type for tray 1.
		Paper Size
	Paper Out Action	Wait Forever	Determines how the product reacts when a print job requires
		Cancel	a media size or type that is unavailable or when a specified
			tray is empty.
		Override	● Select Wait Forever to make the product wait until the
			correct media is loaded.
			● Select Override to print on a different size paper after
			a specified delay.
			● Select Cancel to automatically cancel the print job after
			a specified delay.
			● If either Override or Cancel is chosen, the control
			panel prompts for the number of seconds to delay. Use
			the arrow keys to either decrease the time or increase
			the time up to 3600 seconds.
Print Density	(Range of 1-5)		Sets how much toner the product should apply to thicken
			lines and edges.
Volume Settings	Alarm Volume	Soft	Sets the volume levels for the product. Each volume-type
	Ring Volume	Medium	has the same four volume settings.
	Key-Press Volume	Loud
	Phoneline Volume	Off
Time/Date	(Settings for time		Sets the time and date setting for the product.
	format, current time,
	date format, and
	current date.)
Product Security	On		Sets the product-security feature. When the setting is set to
	Off		On, you must set a personal identification number (PIN).
Disable Fax	On		Disables the product fax features. If a password has been
	Off		set under the Product Security setting, you must enter the
			password to disable the fax features. If a password has not
			been set, you will be prompted to create one.
At Very Low	Black Cartridge	Stop	Sets how the product reacts when it detects that the print
		Prompt	cartridge is out.
		Continue
User-Defined Low	Black	(Range of 1-20)	Sets the percentage at which the control panel generates a
			low-toner message.

ENWW Setup menu 15