QuickSpecs
HP ProLiant ML330 Generation 6
Technical Specifications
System Unit | Tower Dimensions | 7.87 x 16.81 x 24.13 in (200 x 427 x 613 mm) | |
| (H x W x D) |
|
|
| (W/O foot stand) |
|
|
| Tower Weight | Maximum: | 30 kg |
| (approximate) | (All hard drives, power |
|
|
| supplies and processors |
|
|
| installed) |
|
|
| Minimum: | 16 Kg |
|
| (One hard drive, power |
|
|
| supply and processor |
|
|
| installed) |
|
| Input Requirements | Rated Line Voltage | 100 to 240 VAC |
| (per power supply) | Rated Input Current | 7.1 Amps (at 120VAC) to 3.5 Amps (at 240 |
|
|
| VAC) |
|
| Rated Input Frequency | 50 to 60 Hz |
|
| Rated Input Power | 852 W |
| BTU Rating | Maximum | 460W - 1773 BTU / hr (at 120 VAC), 1715 (at |
|
|
| 240 VAC) |
|
|
| 750W - 2892 BTU / hr (at 120 VAC), 2797 (at |
|
|
| 240 VAC) |
|
|
| 1200W - 3530 BTU / hr (at 120 VAC), 4600 |
|
|
| (at 240 VAC) |
| Power Specifications | To review typical system power ratings use the Power Calculator which | |
|
| is available via the online tool located at URL: www.hp.com/go/proliant- | |
|
| ||
|
| - Click on the system of interest. Example: ML330 G6 | |
|
| - Follow the instructions of the next screens. | |
| Power Supply Output | Rated | 460 (750) W (at 100 VAC), |
| (per power supply) | Power | 460 (750) W (at 200 VAC) |
|
| Maximum Peak Power | 460 (750) W (at 100 VAC), |
|
|
| 460 (750) W (at 200 VAC) |
|
|
| NOTE: See Power Supply Specifications |
|
|
| tables for complete details on 460W PSU and |
|
|
| optional 750W. |
| System Inlet | Operating | 50° to 95° F (10° to 35° C) at sea level with an |
| Temperature |
| altitude derating of 1.8°F per 1,000 ft (1.0° C |
|
|
| per every 305 m) above seal level to a |
|
|
| maximum of 10,000 ft (3050 m) no direct |
|
|
| sustained sunlight . Maximum rate of change |
|
|
| is 18°F/hr (10°C/hr). The upper limit may be |
|
|
| limited by the type and number of options |
|
|
| installed. System performance may be |
|
|
| reduced if operating with a fan fault or above |
|
|
| 86°F (30°C). |
|
| ||
| Relative Humidity | Operating | 10% to 90% relative humidity (Rh), 82.4°F |
|
| (28°C) maximum wet bulb temperature, non- | |
|
|
| condensing. |
|
| 10% to 95% relative humidity (Rh), 101.7°F | |
|
|
| (38.7°C) maximum wet bulb temperature, |
|
|
| |
DA - 13361 Worldwide QuickSpecs — Version 17 — | Page 41 |
