QuickSpecs
HP ProLiant ML330 Generation 6
Technical Specifications
HP Smart Array B110i SATA RAID Controller (RAID 0,1,10)
Dimensions | N/A (embedded) |
Disk Drive and | 3.0 Gbps SATA |
Enclosure Protocol |
|
Support | |
Architecture |
|
SAS Connectors | 4 internal x1 SATA connectors |
Software Upgradeable | Yes. HP Smart Array hot plug Advanced Pack No Media |
Firmware | license including 1yr 24x7 Technical Support |
Maximum Capacity | 2TB |
Memory Addressing | 6GB (maximum) |
Logical Drives | 2 (maximum) |
Supported |
|
RAID Support | RAID 1 (Mirroring) |
| RAID 0 (Striping) |
| RAID 10 |
|
|
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
Capacity | 250,059MB |
Height* | 1.028 in (26.1 mm) |
Width | 4.00 in (101.6 mm) |
Depth* | 5.787 in (147.0 mm) |
Interface | Serial ATA |
Transfer Rate | 3Gb/s |
(Maximum) |
|
Native Command | N/A |
|
Queuing |
|
|
Seek Time | Single Track | 1.0 ms |
(typical reads, including | Average | <8.5 ms |
settling) | 17.0 ms | |
| ||
| Rotational Speed | 7,200 rpm |
Physical Configuration Bytes/Sector | 512 | |
| Logical Blocks | 488,397,168 |
Operating Temperature41° to 131° F (5° to 55° C) * Maximum drive dimension
DA - 13361 Worldwide QuickSpecs — Version 17 — | Page 43 |
